摘要 / Abstract
摘要
结合实际情况来看,在我国经济快速发展背景下,机械工程领域也得到了快速发展,其中相似理论在机械工程中的应用推动了机械工程领域的发展。由此可见,机械工程发展中需要加大相似理论的应用力度,将相似理论中的指导作用充分发挥出来,同时还应将像相似理论作为机械工程模型的构建根本,以此来提高机械工程的质量,有效解决机械工程领域中遇到的问题。目前相似理论在机械工程中应用对机械工程运作起着一定的指导作用。基于此,本文针对相似理论及其在机械工程中的应用进行了探讨。
关键词
相似理论;机械工程;应用
Abstract
Combined with the actual situation, in the background of China's rapid economic development, the field of mechanical engineering has also been developed rapidly, in which the application of similarity theory in mechanical engineering has promoted the development of the field of mechanical engineering. It can be seen that the development of mechanical engineering needs to increase the application of similar theory, the similar theory in the guidance role to give full play to, at the same time should also be like the similar theory as the construction of mechanical engineering model fundamental, in order to improve the quality of mechanical engineering and effectively solve the problems encountered in the field of mechanical engineering. At present, the application of similarity theory in mechanical engineering plays a certain guiding role in the operation of mechanical engineering. Based on this, this paper discusses the similarity theory and its application in mechanical engineering.
Key words
Similarity theory; Mechanical engineering; Application
参考文献 / References
[1]刘磊.相似理论在机械工程中的应用探讨[J].山东工业技术,2019(08):7.
[2]任仲贺,武美萍,缪小进,吴克中,张学东.面向工程机械再制造的相似模型试验研究[J].现代制造工程, 2019(02): 128-133.
[3]谈建民.试析相似理论及其在机械工程中的应用[J].科技风,2018(21):113.
[4]宋健.基于相似理论的断路器传动机构模型设计研究[D].西安理工大学,2017.
[5]李锐,张路阳,刘琳等.基于相似理论的三跨桥梁磁流变隔振[J].吉林大学学报(工学版), 2018, 048(003): 787-795.
[6]朱金鑫.相似理论及其在机械工程中的应用[J].科技风, 2018(3):1.
[7]刘磊.相似理论在机械工程中的应用探讨[J].山东工业技术, 2019(8):1.
[8]李宏玲,董玉德,黄智豪,等.基于相似性理论的轮胎花纹相似度检测与分析[J].中国机械工程, 2021, 32(14):7.
[9]姚冬艳.基于模板匹配的机器视觉装配机器人理论与应用研究[D].郑州大学,2019.
[10]张文笛,罗忠,于清文,等.直板叶片振动响应试验的相似关系确定方法[J].航空发动机, 2019, 45(5):7.
[11]彭锐涛,谢炎培,罗秀强,等.100%低地板齿轮箱振动分析及噪声预估[J].铁道科学与工程学报, 2020, 017 (012): 3181-3189.
[12]王珊珊刘青荣阮应君刘洪运.基于聚类选址的区域能源系统站网布局优化规划[J].科学技术与工程, 2021, 021 (015): 6305-6311.
[13]汪嘉晨.基于特征网络的轴承故障诊断方法研究[D].贵州大学,2019.